DF-500 / Digi Fan

Is a powerful and versatile special wind machine designed for studios, theaters, theme parks, touring, photographic and more. It is suitable for wide range application including blowing haze, smoke, bubbles, confetti or snow, cooling performers, dimmer racks or amplifiers even drying paint in studio. DF-500 can be controlled through standard DMX signal or master/slave operation through data link. Versatile yoke for overhead rigging, floor sitting or stand mounting. Housing is constructed from a molded lightweight plastic venting device with rugged tubular steel surrounded for transport and protection. The 11” one-piece blade and spiral front grill for creating narrow focus wind stream. Compact,
lightweight and powerful.

 

KUPO Digi FanKUPO Digi Fan

Specification

- Power input: 100-240V AC, 1200W, Current Max. 10A.
- Motor: 500W, Max. 3500RPM.
- DMX mode: DMX on-off and volume control.
- Memory: 9 mode memory setting available.
- One touch turbo function: 0-3500RPM within 5 sec.
- Air volume: 1700CBM / hr .
- Wind speed: 60KM / hr .
- Remote controller: Supplied w/3M cable.
- Built-in master / slave control interface.
- Dimension: 480 x 560 x 460 mm.
- Weight: 12.5 kg.
 

 

LINK

Master and Slave - Up to 9 Fans can be locally controlled by one controller using DMX data link.

 

 

FOUR REASONS DIGIFAN MAKES A VORTEX WIND EFFECT / ALWAYS PUT THE FAN BEHIND THE SMOKE SOURCE SO AS TO NOT GUM UP THE FAN WITH FLUID.

KUPO Digi Fan
11” one piece deep pitch blade churn through theair , maximizing the amount o f t h e a i r m o v e d with the each turn of powerful motor.
KUPO Digi Fan
The spiral shape designed front grill offset the direction of the air as it twists off the blade. This allows the air to travel long distance.

KUPO Digi Fan
Air inlet duct tube ensures that the deep blade are fully enclosed in a cylindrical duct, air is sculpted into a column (beam of air).
KUPO Digi Fan
To combine deep pitch blade, spiral grill, ducted tube and a switching power supply the multi function Digi fan is able to create a fully controllable vortex wind effect.

KUPO Digi Fan
Multi functional control box for Manual, DMX and Program setting.
KUPO Digi Fan
Switch for local or DMX operation mode.
KUPO Digi Fan
Switching power supply with aluminum enclosure.

KUPO Digi Fan
Molded plastic venting encompassed by rugged steel frame.
KUPO Digi Fan
Sitting on floor by its own floor stand.
KUPO Digi Fan
Sitting on stand with 28mm spigot.

KUPO Digi Fan
Rigging on truss through the 13mm hole in the center of the bracket plate.
KUPO Digi Fan
Industrial grade 500W, Max. 3500RPM Motor.
KUPO Digi Fan
Locking knob with bearing for tighten yoke and adjusting direction.

KUPO Digi Fan
11” one piece deep pitch blade.
KUPO Digi Fan
KUPO Digi Fan
On/Off switch, universal 100-240V power input and fuse protection.

KUPO Digi Fan
 
KUPO Digi Fan