CHP-2E / Mini Motor Pickle

Mini Motor Pickle
RIGPRO Chain Hoist Mini Motor Pickle

Mini Motor Pickle is designed for LVC(Low Voltage Control) type chain motor. It is must-have gadget to rigger’s belt. Three LEDs in the rear chassis help rigger to indentify the condition of the hoist on the go. Red LED shows the power is well connected; Yellow and green indicates respectively UP or DOWN direction while running the chain. It is built up rocker switch which will immediately and automatically stop the movement while your finger or thumb leaves the switch. Carabiner is attached for rigger’s most mobility. CEE 16A/4P and Turn-lock 20A/4P are available. Mini Motor Pickle is ready for professional rigger to guide your chain in & out between your finger tip.

 

CHP-2E / CEE 16A / 4 pins

CHP-2E Mini Motor Pickle w / CEE 16-4h 3P+E 16 amp yellow plug (for Rigpro, CM lodestar, Stagemaker, Prolyte chain hoist).

Features
1. Lightweight & portable.
2. Up and Down control from a rocker switch.
3. Power LED indicates once chain motor power is connected.
4. Different color of LED indicates Up & Down direction.
5. Belt clip is included.

HOW DOES IT WORK?

 
Step 1.
Once chain hoist power is connected the power LED indicator will on. Let you know the motor is ready to go.
 
Mini Motor Pickle
Step 2.
Up direction with Green LED indicator to tell correct operation way even in dark.
 

Mini Motor Pickle

Step 3.
Down direction with Yellow LED indicator to tell correct operation way even in dark.
 

Mini Motor Pickle

 
Application
Lightweight & portable. Up and Down control from a rocker switch.
 
Mini Motor Pickle