KUPO Chain Hoist BGV D8+(IGVW SPQ2)

 

RD-750 / D8+ CHAIN HOIST

KUPO Chain Hoist BGV D8+(IGVW SPQ2)

 

RD-750P / D8+ CHAIN HOIST


Configuration

5-POCKET LIFT WHEEL

5-pocket lift chain wheel for smooth and quiet lifting operation.
 
 
BGV D8+ Chain Hoist 5-POCKET LIFT WHEEL

HELICAL GEARING

Helical gears used to cement 3-step drive system for quiet operation and long wear life.
 

BGV D8+ Chain Hoist HELICAL GEARING

 

ACCESSORIES

Friction clutch is located outside the load patch and set at 125% load capacity while delivered.
 

BGV D8+ Chain Hoist OVERLOAD PROTECTION

HEAVY DUTY DOUBLE DC BRACK

Two independently-acting spring-applied DC brakes aims for higher safety standard.
 
BGV D8+ Chain Hoist HEAVY DUTY DOUBLE DC BRACK

 

ALLEN KEY TOOL

Adjusting clutch torque, if necessary, is convenient with an Allen key tool.
 
BGV D8+ Chain Hoist ALLEN KEY TOOL

CLASS F MOTOR

Insulaton class F motor (0.75Kw x 4P) is well engaged inside the alumimum frame for excellent working thermal control.
 

BGV D8+ Chain Hoist CLASS F MOTOR

FOLDABLE GRIPS

Foldable grips make transportation easy, and reduce the interference over the operation.
 
 
BGV D8+ Chain Hoist FOLDABLE GRIPS

X10 MECHANICAL DESIGN

10:1 dimensioning mechanical design factor for ultimate robust and safety.
 
 
BGV D8+ Chain Hoist X10 MECHANICAL DESIGN

PRECISE & SAFE

Micro Switch Positioning (MSP) provides an easy manner for DC hoist to set the up or down traveling position without too much effort.
 
BGV D8+ Chain Hoist PRECISE & SAFE
 

LIFTING HOOK

Both upper and lower hook are fabricated of SF45C and allow 360degree swivling. Equipped with spring latch to enhance the loading safety.
 
BGV D8+ Chain Hoist LIFTING HOOK

 

GRADE 80 LOAD CHAIN

Grade 80premium carbon steel alloy load chain for overhead rigging. Black phosphate finish for corrosion resistance and low key.
 
BGV D8+ Chain Hoist GRADE 80 LOAD CHAIN

 

ROBUST CHAIN BAG

Fabricated of double layer 1000 denier fabric with heavy duty eye hook, provides upmost storage compartment gor load chain.
 
BGV D8+ Chain Hoist ROBUST CHAIN BAG
 
BGV D8+ Chain Hoist Rubber block

 

 

BGV D8+ Chain Hoist Rubber block

 

RUBBER BLOCK

Rubber block has a dia. 5mm perforate hole, leaving a cable tie to anchor the rubber block on chain tightly from slipping. Palm-size rubber block is handy to grip and slide. Damage-free on chain link and durable for frequent use.
KUPO RD-500 / RD-500P BGV D8+ Chain Hoist

Outstanding Features:

- 5-pocket liftwheel makes lifting smoother and less vibration

- Epoxy black powder coated for less visibility and corrosion resistance; with rubber gasket and mechanical design, the complete unit turns to be IP55 rated.

- Forward-curve enhanced Nylon chain guide is robust and keeps chains running smoothly in the central.

- Two fordable handles provide an easy manner for transportation of the hoist.

- Housing is fabricated of gravity die-cast aluminum; light weight yet robust and durable.

- Gears are made of alloy steel with heat treatment for steady operation and less wearing and fine grounding on gears makes engagement precisely with less operation noise.

- Upper and lower hook are made of drop-forged high tensile carbon steel,allowing 360 degree freely swiveling.

- Over-heat protection, for the maximum limit of 140 (+/-5) Celsius degree,will only allow to lower the load instead of lifting.

- Micro Switch Positioning (MSP) helps to set the up and down limit on travelling position without too much effffort on direct control chain hoist (applied for RD-750P model).

SPECIFICATION

- Type: DC (direct voltage control)
- Motor: 0.75KW x 4P- Motor isolation class: F
- Operation voltage: AC 400V / 50Hz
- Lifting speed: 4M/min (50Hz), 4.8M/min (60Hz)
- Load wheel: 5-pocket

 
 
- Load chain: Grade 80, 7.1 x 20.2mm
- Duty cycle: 2m FEM class, ED 40% or 240 on/offff per hour
- Friction clutch: outside the load path
- Chain hoist weight: 50kgs (without chain)

 
 
- Chain weight: 1.1kgs per meter
- Micro Switch Positioning: optional

 

Capacity (kg) Model Speed(m/mim) 50Hz/60Hz Fall No. Load Chain (Dia x Picth) (mm) Motor(kw x pole) Weight of hoist (kg)
750 kg RD-750 4.0 / 4.8 1 Ø 7.1 x 20.2 0.75 x 4 50
750 kg RD-750P 4.0 / 4.8 1 Ø 7.1 x 20.2 0.75 x 4 50

 


 

DIMENSIONS: (MM)


KUPO RD-500 / RD-500P BGV D8+ Chain Hoist
 
Dimension: (mm)
Model A B C D F H I J M
RD-750 650 185 23 267 213 33 175 123 30
RD-750P 650 185 23 267 213 33 175 123 30

 

 

KUPO RD-500 / RD-500P BGV D8+ Chain Hoist

Capacity (kg) Model Speed(m/mim) 50Hz/60Hz Fall No. Load Chain (Dia x Picth) (mm) Motor(kw x pole) Weight of hoist (kg)
750 kg RD-750 4.0 / 4.8 1 Ø 7.1 x 20.2 0.75 x 4 50
750 kg RD-750P 4.0 / 4.8 1 Ø 7.1 x 20.2 0.75 x 4 50


KUPO RD-500 / RD-500P BGV D8+ Chain Hoist
Dimension: (mm)
Model A B C D F H I J M
RD-750 650 185 23 267 213 33 175 123 30
RD-750P 650 185 23 267 213 33 175 123 30

 

 

KUPO RD-500 / RD-500P BGV D8+ Chain Hoist

Introducing RD-750 and RD-750P, all-new Rigpro chain hoist complying with German BGV D8+ (IGVW SPQ2) standard. Load capacity 750kgs. Euipped with double DC brake and designed  based on 10:1 mechanical safety factor. Clutch is located outside the load patch and acts as overload protection device. Robust aluminum die-cast housing and IP54 enclosure. Optional Micro Switch Positioning (MSP) provides the DC (direct voltage control) chain hoist an easy, tool-free and precise approach to set up the hoist traveling limit. Experience more and check out at www.stage.com.tw, or e-mail us by writing to This email address is being protected from spambots. You need JavaScript enabled to view it.