KUPO COMPLY WITH BGV D8 CHAIN HOIST (DGUV VORSCHRIFT 54)

RH-250 / BGV D8 (DGUV VORSCHRIFT 54) CHAIN HOIST

KUPO COMPLY WITH BGV D8 CHAIN HOIST (DGUV VORSCHRIFT 54)

RH-500 / BGV D8 (DGUV VORSCHRIFT 54) CHAIN HOIST

KUPO COMPLY WITH BGV D8 CHAIN HOIST (DGUV VORSCHRIFT 54)

RH-500P / BGV D8 (DGUV VORSCHRIFT 54) CHAIN HOIST

KUPO COMPLY WITH BGV D8 CHAIN HOIST (DGUV VORSCHRIFT 54)

RH-1000S4 / BGV D8 (DGUV VORSCHRIFT 54) CHAIN HOIST

KUPO COMPLY WITH BGV D8 CHAIN HOIST (DGUV VORSCHRIFT 54)

RH-1000PS4 / BGV D8 (DGUV VORSCHRIFT 54) CHAIN HOIST

KUPO COMPLY WITH BGV D8 CHAIN HOIST (DGUV VORSCHRIFT 54)

RH-1000CV / BGV D8 (DGUV VORSCHRIFT 54) CHAIN HOIST

KUPO COMPLY WITH BGV D8 CHAIN HOIST (DGUV VORSCHRIFT 54)

RH-2000 / BGV D8 (DGUV VORSCHRIFT 54) CHAIN HOIST

KUPO COMPLY WITH BGV D8 CHAIN HOIST (DGUV VORSCHRIFT 54)

RC-250 / BGV D8 (DGUV VORSCHRIFT 54) CHAIN HOIST


Configuration

Chain Guide

Made of robust material, enhanced Nylon, and comply with housing design to make sure the load chain operating smoothly. RH-1000 / RH-500
 
 
 
 
 
 
 
BGV D8 Chain Hoist Chain Guide

 

The forward-curve shape of enhanced Nylon keeps operating chain in the central position, away from getting stuck in the farther sides. RH-250 pulley type chain guide.
 
 
 
 
 
 

BGV D8 Chain Hoist Chain Guide

 

HOOK

Upper hooks apply material SF45C to cast which allow swiveled 360 and are equipped with safety latch to enhance the loading safety.
-
Lower hooks apply material SF45C to cast which allow swiveled 360 and are equipped with safety latch to enhance the loading safety. Connection plate is bend and formed by high strength steel for excellent safety.
 
BGV D8 Chain Hoist Hook

MECHANICAL OVERLOAD DEVICE

While generated torque is over the friction torque, the overload mechanism will trigger, in which motor keeps running but slipping clutch hold back the hoist from further lifting for the sake of safety.
 
 
BGV D8 Chain Hoist Mechanical Overload Device

MECHANICAL OVERLOAD DEVICE

Gear is made of alloy steel with heat treat-ment for steady operation and less wearing and tearing. Fine-ground gear makes engage-ment precisely with less operation noisy.
 
 
BGV D8 Chain Hoist Mechanical Overload Device

GEAR LIMIT SWITCH (LVC VERSION ONLY)

It can be handy adjusted to the required position, setting the chain travelling limits and offering the preventable method for hoist from over winding and damage.
 

BGV D8 Chain Hoist Gear Limit Switch

Electromagnectic Disk Brake

Electromagnetic disk brake will brake synchronously while the power is off, ensuring the operation safety while loading.
 
 
 
 
BGV D8 Chain Hoist Electromagnectic Disk Brake
 

Magnetic Contactor & Clutch Adjustment

- High performance fuse circuit breakers are fastened in a rotatable bracket for easy maintenance and inspection.
- The clutch torsion can be adjusted through a torque tool by a qualified technician. Easy to access and calibrate.
BGV D8 Chain Hoist Magnetic Contactor & Clutch Adjustment

Alloy Chain

Premium quality and high strength alloy chain, heat treated, used in a variety of sling and tie down applications. For overhead lifting applications, only Grade 80 alloy chain should be used.
 
 
BGV D8 Chain Hoist Alloy Chain
 
BGV D8+ Chain Hoist Rubber block

 

BGV D8+ Chain Hoist Rubber block

RUBBER BLOCK

Rubber block has a dia. 5mm perforate hole, leaving a cable tie to anchor the rubber block on chain tightly from slipping. Palm-size rubber block is handy to grip and slide. Damage-free on chain link and durable for frequent use.

KUPO BGV D8 Chain Hoist

Outstanding Features:

- Gravity die-casted aluminum, matt-black non reflective finish chassis for rigid, light-weighted, durable and low visibility.
 
- Epoxy black powder coated chassis is featuring corrosionresistance, and with fine gasket and mechanical design, the complete unit turns to be IP54 rated.
 
- Enhanced Nylon chain leading plate ensures the chain links properly fit into the lift wheel, and eliminates the possibility of jamming, as well as protects the lift wheel from wet and dirt.
 
- Heavy-duty DC brake automatically gets engaged in the event of power failure, requiring very little maintenance and only minor periodic adjustments.
 
- Hook is made of drop-forged high tensile steel with heat treatment, allowing 360 degree swiveling, and equipped with safety latch to ensure proper rigging the load.
 
- Equipped with duty cycle ED 40% high efficiency, lightweight and robust motor, running the chain hoist quietly and steady.
 
- Operates on three phase voltage of 400V/50Hz, and LVC is 110V as standard. Other voltage for DC and LVC version is available upon request.
 
- Conforms to FEM 2m / ISO M5 classification, covering a wide range of applications.
 
- Average operational noise is within 75dB, quietly working
and less noisy.

Specification

- DC Motor Brake: With two-side single disk brake, electro-magnetic brake actuates synchronously in the event of power failure to ensure the operation safety while loading.
- Overload Slipping Clutch: Protects the hoist from damage of overload, and ensures the life-span of chain hoist.
- Over-Heat Protection: With built-in heat detector, when motor’s inside working temperature reaches 140( ± 5) Celsius degree, the protection mechanism will trigger,
   and not allow lifting the load. Instead, it permits coming down to release the load.
- Gear Limit Switch (only applied for LVC version): Upper and lower limit switches are fitted to switch off the power simultaneously in the case of over lifting or lowering position.
- Phase Protection (only applied for LVC version): Built with phase error relay, in case of any phase missing or incorrect, the machine will not be in active, ensuring the safety and durability to all components.
 
Capacity (kg)
Model
Speed (m/mim)
50Hz/60Hz
Fall No.
Load Chain (Dia x Picth)
(mm)
Motor
(kw x pole)
Weight of hoist
(kg)
2000 RH-2000 4.0 / 4.8 2 Ø 7.1 x 20.2 1.50 x 2 62
1000 RH-1000PS4 4.0 / 4.8 1 Ø 7.1 x 20.2 0.75 x 4 47
RH-1000S4 4.0 / 4.8 1 Ø 7.1 x 20.2 0.75 x 4 47
RH-1000LV 3.3 / 4.0 1 Ø 7.1 x 20.2 0.75 x 4 47
RH-1000CV 4.0 / 4.8 1 Ø 7.1 x 20.2 0.75 x 4 47
500 RH-500 4.0 / 4.8 1 Ø 6.3 x 19.1 0.40 x 4 42
250 RH-250 4.0 / 4.8 1 Ø 4.0 x 12.0 0.25 x 4 30

DIMENSIONS: (MM)


BGV D8 Chain Hoist
 
Dimension: (mm)
Model A B C D F H I J M
RH-250 410 135 18 205 175 28 165 85 25
RH-500 600 156 23 247 221 33 185 105 30
RH-1000LV 650 156 23 247 221 33 185 105 30
RH-1000CV 650 156 23 247 221 33 185 105 30
RH-1000PS4 650 156 23 247 221 33 185 105 30
RH-1000S4 650 156 23 247 221 33 185 105 30
RH-2000 860 170 27 275 240 39 170 170 30


BGV D8 Chain Hoist




New feature on Rigpro chain hoist—rubber block with micro switch positioning—sets the limit of hoist movement easiest ever. Grab and slide the rubber block to set the travel limit; no bother opening up the chassis, and it’s totally tool-free! A brand-new way to run the DC hoist that you shouldn’t miss out. See how it works or visit www.stage.com.tw for more details.


RigPro electric chain hoist is built for rigorous entertainment rigging environment. The range confirms to industrial FEM 2m/ISO M5 classification as well as BGV D8 for event rigging category. It features durable, reliable, quite operation, user friendly and less maintenance.


Rigpro offers a range of sophisticated controllers for direct control chain hoist, incorporating unique design for universal power input, sequence and phase monitoring, “go” link for synchronizing multi units and quick phase correction. All these outstanding features are crafted to cater to the needs in entertainment rigging. www.stage.com.tw